User Guide

478 System Messages
System Messages
103-000150-001
August 29, 2001
Novell Confidential
Manual 99a38 July 17, 2001
PSERVER-X-64: Insufficient memory is available to create the main menu. The print
server console will be disabled.
Source: PSERVER.NLM
Possible Cause: The print server might not have enough available memory to initialize.
Action: Increase the memory available at the server. See Freeing Server Memory
Temporarily in the Server Operating System Administration Guide.
PSERVER-X-79: The program cannot create the server status form.
Source: PSERVER.NLM
Possible Cause: The print server might not have enough available memory to initialize.
Action: Increase the memory available at the server. See Freeing Server Memory
Temporarily in the Server Operating System Administration Guide.
PSERVER-X-80: The program cannot push the main menu.
Source: PSERVER.NLM
Possible Cause: The print server might not have enough available memory to initialize.
Action: Increase the memory available at the server. See Freeing Server Memory
Temporarily in the Server Operating System Administration Guide.
PSERVER-X-81: Insufficient memory is available to build a NetWare server list.
Source: PSERVER.NLM
Possible Cause: The print server might not have enough available memory to initialize.
Action: Increase the memory available at the server. See Freeing Server Memory
Temporarily in the Server Operating System Administration Guide.
PSERVER-X-88: The program cannot get the object ID for the print server.
Source: PSERVER.NLM
Possible Cause: eDirectory, which must be opened to get object IDs, is locked or corrupted.
eDirectory is usually locked only momentarily.
Action: Try printing again in a few minutes. If the error persists, run DSREPAIR.