User Guide

PSERVER Messages 479
System Messages
103-000150-001
August 29, 2001
Novell Confidential
Manual 99a38 July 17, 2001
PSERVER-X-89: The print server is already attached to too many NetWare servers and
cannot attach to NetWare server name.
Source: PSERVER.NLM
Possible Cause: A print server queue can be serviced by up to 25 print servers. Twenty-five
servers are already attached and servicing this queue.
Action: If the print server needs to service this queue, detach one of the other print
servers from the queue.
PSERVER-X-90: NetWare server name is unknown at this time.
Source: PSERVER.NLM
Possible Cause: The uesr might have mistyped the name of the server,
Action: Make sure to type the name of the server correctly.
Possible Cause: The user specified a server that is not on the network.
Action: List all the servers that the workstation can recognize by using NLIST.
Possible Cause: The user specified a server that is down for maintenance.
Action: If the server is down for maintenance, try the command when the server is
back up.
PSERVER-X-91: The NetWare server's bindery is locked. You cannot attach to
NetWare server name at this time.
Source: PSERVER.NLM
Possible Cause: The network supervisor locked the bindery for maintenance. Usually this
situation is only temporary.
Action: Try the command when the server is back up.
PSERVER-X-92: You cannot attach to NetWare server name because it has no more
connections available.
Source: PSERVER.NLM
Possible Cause: The print server needs one connection slot to run. All 100 connection slots are
in use.
Action: Wait until a connection slot becomes available. Or, you can use MONITOR to
clear a connection.