User Guide

PSERVER Messages 481
System Messages
103-000150-001
August 29, 2001
Novell Confidential
Manual 99a38 July 17, 2001
 To delete the print server, run PCONSOLE, select Print Server
Information, and delete the print server from the list. Then re-create the
print server.
 To delete accounting, run NetWare Administrator and select Accounting,
then select Accounting Servers. Delete all servers from the list. Press
<Esc> and answer Yes to the prompt to remove accounting. Then reinstall
accounting.
PSERVER-X-97: Account on NetWare server name was disabled because of intruder
detection.
Source: PSERVER.NLM
Possible Cause: The login property for intruder detection is set. NetWare does not have a
program that sets this property for print servers. Either the bindery is
corrupted, or you have used a third-party program to set this property.
Action: Complete one of the following:
 If you have not used a third-party utility to set this property, run
DSREPAIR on the bindery server.
 If you have a third-party program that sets this property, use it to remove
the station restriction.
PSERVER-X-98: The supervisor has limited the number of concurrent connections
the print server can have on NetWare server name.
Source: PSERVER.NLM
Possible Cause: The print server reached the allowed limit for concurrent connections to the
file server.
Action: Wait until another user logs out, or free a connection using MONITOR.
PSERVER-X-99: The supervisor has disabled the print server's account on NetWare
server name.
Source: PSERVER.NLM
Explanation: The print server no longer has an account on the server.
Action: If you have appropriate rights, establish a new account for the print server.