User Guide

PSERVER Messages 489

System Messages

103-000150-001

August 29, 2001

Novell Confidential

Manual 99a38 July 17, 2001

PSERVER-X-182: Insufficient memory is available to get an interrupt resource tag for

the print server.

Source: PSERVER.NLM

Possible Cause: The print server might not have enough available memory to initialize.

Action: Increase the memory available at the server. See Freeing Server Memory

Temporarily in the Server Operating System Administration Guide.

PSERVER-X-183: An error occurred during attempt to write to the audit file name. The

entry was not logged.

Source: PSERVER.NLM

Possible Cause: The print server has insufficient rights to the file or directory containing the

log file.

Action: Determine where the print server is keeping its audit file.

Possible Cause: The directory that contained the file has been deleted.

Action: Make sure the directory exists and that the print server has sufficient rights to

write to the directory and file.

Possible Cause: The file is flagged so that it cannot be written to.

Action: Make sure the file is not flagged Read Only.

PSERVER-X-184: Insufficient memory is available to get a resource tag for printer

ports.

Source: PSERVER.NLM

Possible Cause: The print server might not have enough available memory to initialize.

Action: Increase the memory available at the server. See Freeing Server Memory

Temporarily in the Server Operating System Administration Guide.

PSERVER-X-185: The print server received error code during attempt to log in to the

network. Access to the network was denied. Verify that the print server name and

password are correct.

Source: PSERVER.NLM

Possible Cause: The user probably specified an invalid print server name or password.

Action: Try again, making sure that the print server is running and that you type a valid

print server name and password. For information about the error code

displayed, search the Error Codes online documentation (http://