User Guide

492 System Messages
System Messages
103-000150-001
August 29, 2001
Novell Confidential
Manual 99a38 July 17, 2001
PSERVER-X-242: An error (code) occurred during attempt to add object name to the
notification list. This object will not be notified of printer errors for printer number,
name.
Source: PSERVER.NLM
Action: For information about the error code displayed, search the Error Codes online
documentation (http://www.novell.com/documentation/lg/nwec/docui/
index.htm).
PSERVER-X-247: Attempt to add printer name as printer number failed. A printer
already exists with that number.
Source: PSERVER.NLM
Possible Cause: The print server is configured to service two printers with the same number.
Each printer serviced by the print server must have a unique number for that
print server.
Action: Change one of the printers' numbers.
PSERVER-X-268: There is insufficient memory for the print server to complete the
requested task.
Source: PSERVER.NLM
Possible Cause: The print server does not have enough available memory.
Action: Increase the memory available at the server. See Freeing Server Memory
Temporarily in the Server Operating System Administration Guide.
PSERVER-X-269: An error occurred attempting to read the audit file name. The audit
file may be corrupted.
Source: PSERVER.NLM
Possible Cause: The file might be corrupted.
Action: If you suspect file corruption, delete the file; then enable audit tracking again.
Possible Cause: The print server has insufficient rights to the file or directory where it keeps
its log file.
Action: Determine where the print server is keeping its audit.
Possible Cause: The file is flagged so that it cannot be written to.
Action: Make sure the file is not flagged Read Only.