User Guide

SBCON Messages 517
System Messages
103-000150-001
August 29, 2001
Novell Confidential
Manual 99a38 July 17, 2001
SBCON Messages
These messages are generated by the SBackup Console (SBCON) module.
SBCON-X-7: Screen allocation error
Source: SBCON.NLM
Possible Cause: There is not enough memory on the server.
Action: Unload SBCON.NLM and QMAN.NLM Reduce the transfer buffer size in the
configuration file, SYS:\ETC\SMS\SBACKUP.CFG, then reload
QMAN.NLM and SBCON.NLM again. If the problem persists, upgrade the
server memory and try again.
SBCON-X-21: Error connecting to TSA
Source: SBCON.NLM
Possible Cause: The TSA is not loaded or there may be another problem with the TSA.
Action: If the TSA is not loaded, load the TSA. If the TSA is loaded, unload and reload
the TSA and SMDR.
SBCON-X-22: Error listing the Target Service
Source: SBCON.NLM
Possible Cause: The workstation TSAs have not been registered to the TSAProxy.
Action: 1. Make sure the workstation TSA is running. 2. Set the preferred server
through the TSA interface and submit the registration. 3. Retry the operation.
If the problem persists, contact your Novell support provider.