User Guide

518 System Messages
System Messages
103-000150-001
August 29, 2001
Novell Confidential
Manual 99a38 July 17, 2001
SBCON-X-23: No services are available.
Source: SBCON.NLM
Possible Cause: The workstation TSAs have not been registered to the TSAProxy.
Action: 1. Make sure the workstation TSA is running. 2. Set the preferred server
through the TSA interface and submit the registration. 3. Retry the operation.
If the problem persists, contact your Novell support provider.
SBCON-X-27: The specified user does not exist.
Source: SBCON.NLM
Possible Cause: The user name entered is not valid.
Action: Type the appropriate user name and context. If full context must be used,
precede the name with a period (.), for example, .admin.novell. Try again.
SBCON-X-28: Error connecting to Target Service
Source: SBCON.NLM
Possible Cause: With DOS TSA, only one connection is allowed. This error may occur if
several users are trying to connect to the DOS TSA at the same time.
Action: Disconnect the first connection and retry the operation.
SBCON-X-30: Error opening the file filename
Source: SBCON.NLM
Possible Cause: Either the directory does not exist for this file, or this file is Read Only.
Action: If the directory does not exist, create the directory. If the file is Read Only,
remove the Read Only attributes.
SBCON-X-32: The specified key function is not implemented.
Source: SBCON.NLM
Possible Cause: This function is not yet implemented.
Action: Contact your Novell support provider for the new modules when they become
available.