User Guide

522 System Messages
System Messages
103-000150-001
August 29, 2001
Novell Confidential
Manual 99a38 July 17, 2001
SBCON-X-175: Scheduling not enabled
Source: SBCON.NLM
Possible Cause: The scheduling information for the job is corrupted or it is wrong. Perhaps
other applications have tried to submit a job to the job queue.
Action: Make sure the job queue is being used by Enhanced SBACKUP only.
Action: If the job file is corrupted, enter the scheduling information again, but
unexpected results might occur.
Action: Delete the job and try again.
SBCON-X-178: The job is no longer in the queue.
Source: SBCON.NLM
Possible Cause: While the job was being executed, the job was deleted using NetWare
Administrator.
Action: Do not use NetWare Administrator to access SMS job queues.
SBCON-X-183: Status report error: error_number
Source: SBCON.NLM
Possible Cause: An internal error has occurred.
Action: Report the error message and number to your Novell support provider.
SBCON-X-193: Do you want to abort this session?
Source: SBCON.NLM
Possible Cause: You pressed Delete while displaying the active job's runtime status in the Job
Administration menu.
Action: Select Yes if you want to stop the job; otherwise, select No and the job will
continue to run.
SBCON-X-196: Alert Handler can't allocate the resource_tag_name resource tag.
Source: SBCON.NLM
Possible Cause: The server is out of memory.
Action: Unload SBCON.NLM and QMAN.NLM Reduce the transfer buffer size in the
configuration file, SYS:\ETC\SMS\SBACKUP.CFG, then reload
QMAN.NLM and SBCON.NLM again. If the problem persists, upgrade the
server memory and try again.