User Guide

SBCON Messages 523
System Messages
103-000150-001
August 29, 2001
Novell Confidential
Manual 99a38 July 17, 2001
SBCON-X-197: No connection is available to SMSDI.
Source: SBCON.NLM
Possible Cause: The SMSDI.NLM module is not loaded.
Action: Load SMSDI.NLM at the console prompt.
SBCON-X-198: No device and media are found with the given name.
Source: SBCON.NLM
Possible Cause: The device driver for the tape device/host adapter is not loaded.
Action: Load the correct device driver.
Possible Cause: No media is present in the tape drive.
Action: Check that the media is present in the tap drive.
Possible Cause: The media is in use by another job.
Action: Make sure no other job is running on the media.
Possible Cause: The media label does not match the media label provided during the job
submission.
Action: Make sure the label provided during job submission is the same as the media
label present during backup/restore. If you are not sure, accept the default
setting for the Device/Media name during job submission.
SBCON-X-199: No device is found in the SMSDI list.
Source: SBCON.NLM
Possible Cause: The device driver was loaded after loading SMSDI.
Action: Unload and reload SMSDI.NLM. If the problem persists, try using the
command list devices at the server console.
SBCON-X-200: The device is not found in the Media Manager database.
Source: SBCON.NLM
Possible Cause: The correct device driver has not been loaded, or an outdated device driver
was loaded.
Action: Load the correct device driver. Contact the device vendor or a Novell support
provider for the correct driver version.