User Guide

SBCON Messages 525
System Messages
103-000150-001
August 29, 2001
Novell Confidential
Manual 99a38 July 17, 2001
SBCON-X-206: Destination slot is not empty.
Source: SBCON.NLM
Possible Cause: You tried to move media into a slot that was not empty.
Action: Move the media into a slot that is empty. See the media list to determine which
slots are empty.
SBCON-X-207: The media in the device is being used.
Source: SBCON.NLM
Possible Cause: Another job is running on the same media you are trying to access.
Action: Wait for the job to complete before running another job. Retry the operation.
SBCON-X-208: The list media is not finished.
Source: SBCON.NLM
Possible Cause: You tried to access the media when the list media command was used at
the server console.
Action: Wait for the list media command to complete, then retry the operation.
Possible Cause: The Media Manager does not have the media database.
Action: If you just inserted a new tape into the tape drive, wait a few minutes, then try
to list the media. If the problem persists, close Enhanced SBACKUP and
unload it. Reload Enhanced SBACKUP.
SBCON-X-209: The media is not found.
Source: SBCON.NLM
Possible Cause: No media is present in the device.
Action: Load the media in the device and retry the operation.
SBCON-X-210: No media is reserved.
Source: SBCON.NLM
Possible Cause: All the media are busy or no medium is present.
Action: Wait for the medium to be released by the application or insert a new media in
a device.