User Guide

SBCON Messages 527
System Messages
103-000150-001
August 29, 2001
Novell Confidential
Manual 99a38 July 17, 2001
SBCON-X-221: The media name is invalid.
Source: SBCON.NLM
Possible Cause: The media name in the job file is not the same as the media loaded when the
job began.
Action: Locate the correct media and insert it into the device. Retry the operation.
SBCON-X-224: The source slot is not reserved.
Source: SBCON.NLM
Possible Cause: The backup or restore source is missing. No medium exists in the location
where the medium needs to be moved.
Action: Make sure the medium exists in the source slot. Retry the operation.
SBCON-X-266: Cannot delete an active job. If you want to terminate it, press Insert
and then Delete.
Source: SBCON.NLM
Possible Cause: You cannot delete a job that is being processed or that is running.
Action: To terminate the job, press Insert in the job list menu, then press Delete in the
job activity screen.
SBCON-X-295: Could not run
Source: SBCON.NLM
Possible Cause: The submitted job could not be executed.
Action: Check that the correct TSA is loaded.
Action: For workstation TSAs, check that the TSA has registered to the correct
TSAProxy.
Action: Check that the device is on, contains media, and the device drivers are loaded.
Action: Load SMSDI.NLM after loading the device drivers.
SBCON-X-303: No Target Service Agents were found on this server.
Source: SBCON.NLM
Possible Cause: No TSAs have been loaded.
Action: Load the appropriate TSA (TSA600.NLM, TSANDS.NLM,
TSADOSP.NLM, or GWTSA.NLM). Retry the operation. If the problem
persists, contact your Novell support provider.