User Guide

SBCON Messages 533
System Messages
103-000150-001
August 29, 2001
Novell Confidential
Manual 99a38 July 17, 2001
SBCON-X-522: An error occurred in the restore job.
Source: SBCON.NLM
Possible Cause: The restore job could not be completed.
Action: Check the activity log file in Sys:system\tsa\log\activity.log for the error.
SBCON-X-525: No media is present.
Source: SBCON.NLM
Possible Cause: Some of the slots are empty in the Autoloader.
Action: This message is for information only.
SBCON-X-528: Could not execute the job: job_name
Source: SBCON.NLM
Possible Cause: The submitted job could not be executed.
Action: Check that the correct TSA is loaded.
Action: For workstation TSAs, check that the TSA has registered to the correct
TSAProxy.
Action: Check that the device is on, contains a media, and the device drivers are
loaded.
Action: Load SMSDI.NLM after loading the device drivers.
SBCON-X-533: Could not load the engine: engine_name
Source: SBCON.NLM
Possible Cause: The SME.NLM module must be present in the system path.
Action: Make sure the SME.NLM is present in the SYS:SYSTEM directory.
SBCON-X-539: An error occurred during session file creation.
Source: SBCON.NLM
Possible Cause: The submitted job could not be executed.
Action: Check that the correct TSA is loaded.
Action: For workstation TSAs, check that the TSA has registered to the correct
TSAProxy.