User Guide

536 System Messages
System Messages
103-000150-001
August 29, 2001
Novell Confidential
Manual 99a38 July 17, 2001
Action: Check disks to make sure they are functioning correctly. If the disk system is
functioning, then contact the NLM vendor.
SERVER-X-113: Error reading MT unsafe API list in NLM's XDC data.
Source: SERVER.EXE
Explanation: There was an error reading part of an NLM. The NLM might be corrupted or
there might be a disk problem.
Action: Check disks to make sure they are functioning correctly. If the disk system is
functioning, then contact the NLM vendor.
SERVER-X-135: API name is not accessible from address space name.
Source: SERVER.EXE
Possible Cause: An NLM loaded into a protected address space is not designed to run in
protected memory.
Action: Run the NLM in the kernel address space.
SERVER-X-137: API name is not accessible from address space name.
Source: SERVER.EXE
Action: See message “SERVER-X-135: API name is not accessible from address
space name.” on page 536
SERVER-X-196: name file exists, overriding default locale values.
Source: SERVER.EXE
Explanation: The language specified by the file will be used instead of the default language.
Action: This message is for information only. No action is necessary.
SERVER-X-197: name file exists but is invalid. NOT overriding default values.
Source: SERVER.EXE
Explanation: Each language supported by NetWare has a language configuration file that is
loaded into the operating system tables. In this case, the language specified by
the file will NOT be used instead of the default language.
Possible Cause: The language configuration file is corrupted.
Action: Delete the corrupted file and copy the original file from the master CD-ROM
or diskette.