User Guide

542 System Messages
System Messages
103-000150-001
August 29, 2001
Novell Confidential
Manual 99a38 July 17, 2001
SERVER-X-618: Invalid startup command: string.
Source: SERVER.EXE
Explanation: A command other than LOAD or SET was issued from within a startup.ncf
file.
Action: Edit the startup.ncf and delete any commands other than LOAD or SET. For
more information, see Using Server Batch Files in the Server Operating
System Administration Guide.
SERVER-X-701: Api_name was called with work to do already enqueued.
Source: SERVER.EXE
Explanation: There is an internal programming error in the NLM.
Action: Contact the NLM vendor.
SERVER-X-703: Module is using number outdated APIs.
Source: SERVER.EXE
Explanation: The operating system displays this message whenever an NLM is loaded that
is using old API calls. The NLM will still function.
Action: Contact the vendor of the NLM for an updated version. Continue to use the
version until you receive the newer version.
SERVER-X-719: Error reading message file.
Source: SERVER.EXE
Explanation: This error might indicate file system or data corruption.
Action: Run VREPAIR and restart the system.
Warning: If you delete the volume, all data will be destroyed. You will have
to restore the data from a backup.
If the problem persists, make sure a volume backup exists. Delete the volume,
re-create it using NWCONFIG, and restore the data from the backup.
SERVER-X-720: Error allocating memory for message file.
Source: SERVER.EXE
Possible Cause: The server probably does not have enough memory to load the message file.