User Guide

548 System Messages
System Messages
103-000150-001
August 29, 2001
Novell Confidential
Manual 99a38 July 17, 2001
SERVER-X-982: Insufficient memory for Command Process Resource tags.
Source: SERVER.EXE
Possible Cause: The server is low on contiguous memory.
Action: Add more memory or unload unnecessary NLM programs.
SERVER-X-983: Error allocating semaphores for Command Line Services
Source: SERVER.EXE
Possible Cause: Server is extremely low on memory.
Action: Add more memory.
SERVER-X-992: Command file processor unable to allocate work buffer.
Source: SERVER.EXE
Possible Cause: The server is running out of Alloc Short Term memory and cannot allocate
enough of this type of memory to process command files.
Action: Increase the memory available to the server. See Freeing Server Memory
Temporarily in the Server Operating System Administration Guide.
SERVER-X-993: Command file processor unable to allocate work buffer.
Source: SERVER.EXE
Action: See message “SERVER-X-992: Command file processor unable to allocate
work buffer.” on page 548
SERVER-X-996: Too many input parameters passed to Command File processor.
Source: SERVER.EXE
Explanation: An .ncf file was passed more than 32 parameters.
Action: Reduce the required parameters to 32 or fewer.
SERVER-X-997: Invalid line in command file - line length exceeds number characters.
Source: SERVER.EXE
Possible Cause: A line in an .NCF file is too long.
Action: Make sure no trailing information comes after the commands in .NCF files.
Edit the file if necessary. For more information, see Using Server Batch Files
in the Server Operating System Administration Guide. (The file being
processed should be a command (DOS) text file.)