User Guide

SERVER Messages 551
System Messages
103-000150-001
August 29, 2001
Novell Confidential
Manual 99a38 July 17, 2001
SERVER-X-1155: Node number configuration is NOT supported and was ignored.
Source: SERVER.EXE
Explanation: This is an informational message indicating that you specified a node number
for a driver that does not allow you to specify a node number.
SERVER-X-1159: Repeated send retries number ignored.
Source: SERVER.EXE
Explanation: This is an informational message given when a driver is loaded and the
number of send retries is repeated. The repeated number was ignored. The
number of send retries is the number of times the board will resend a packet.
SERVER-X-1162: Repeated board name setting ignored.
Source: SERVER.EXE
Explanation: This is an informational message that given when a driver is loaded and the
board name is repeated. The repeated name was ignored.
SERVER-X-1200: Number of supported frame types too big.
Source: SERVER.EXE
Explanation: The driver passed in a number of supported media types to the operating
system that exceeded the system's internal buffer limit of 32.
Possible Cause: The server might be using an outdated driver.
Action: Make sure the driver is certified for the NetWare server you are running and
is functioning properly. If the server has a current and functional driver and the
problem persists, contact a Novell support provider.
SERVER-X-1211: Repeated bus name setting ignored.
Source: SERVER.EXE
Explanation: This is an informational message given when a driver is loaded and the bus
name is repeated. The repeated name was ignored.
SERVER-X-1214: Bus name configuration is not supported.
Source: SERVER.EXE
Possible Cause: When loading a driver, you specified a bus name that the card can't support.
Action: Specify a bus name that the card can support.