User Guide

554 System Messages
System Messages
103-000150-001
August 29, 2001
Novell Confidential
Manual 99a38 July 17, 2001
SERVER-X-1318: Read past end of read buffer.
Source: SERVER.EXE
Explanation: While an NLM was being loaded, a read error occurred.
Possible Cause: The system did not recognize the end-of-file marker.
Action: Try to reload the original NLM. If the original NLM file is corrupted, contact
the vendor of the NLM.
SERVER-X-1319: Error number reading source file.
Source: SERVER.EXE
Severity: Warning
Explanation: The operating system tried to load an NLM, but the process failed.
Possible Cause: This error is caused by internal errors relating to the NLM or to physical disk
errors in the loading process. The NLM is corrupted.
Action: Load a new copy of the NLM from the master disk.
Possible Cause: The disk system is faulty.
Action: If the NLM is not at fault, check the disk system (cables, disk drive, and
controller) for potential problems. If the server is still unable to load the NLM,
call the vendor of the NLM for any fixes or updates.
SERVER-X-1321: Error number reading source file.
Source: SERVER.EXE
Severity: Warning
Action: See message “SERVER-X-1319: Error number reading source file.” on page
554.
SERVER-X-1343: FreeObject received an invalid object pointer number.
Source: SERVER.EXE
Explanation: Memory might be corrupted.
Action: Replace memory or contact your support provider.