User Guide

558 System Messages
System Messages
103-000150-001
August 29, 2001
Novell Confidential
Manual 99a38 July 17, 2001
SERVER-X-1542: Module name is a NIOS only NLM.
Source: SERVER.EXE
Explanation: This NLM cannot be run on a server; it must be run on a client.
Action: Run the NLM on a client workstation; or choose a different NLM to load on
the server.
SERVER-X-1543: Could not redirect block number on device number.
Source: SERVER.EXE
Possible Cause: A potential device failure and data loss has been caused by one of the
following:
 An I/O error occurred that could not be corrected by Hot Fix. No
redirection blocks are left, or the hard disk is no longer operational.
 Due to insufficient space, the system was unable to redirect data during a
Hot Fix operation.
Action: Use the messages that follow this message to determine why Hot Fix has
failed. See Disk Errors in the Server Operating System Administration Guide.
SERVER-X-1544: Warning: There are no more redirection blocks on device name.
Source: SERVER.EXE
Explanation: The partition has used all its redirection blocks. Future I/O errors cannot be
redirected to Hot Fix.
Action: The disk is in danger of failing. Troubleshoot or replace the disk.
SERVER-X-1545: Insufficient memory to load NLM.
Source: SERVER.EXE
Possible Cause: The server does not have enough memory to load a given NLM.
Action: Increase the memory available to the server. See Freeing Server Memory
Temporarily in the Server Operating System Administration Guide.
SERVER-X-1546: Invalid record in load file.
Source: SERVER.EXE
Possible Cause: The operating system tried to load an NLM that had invalid code or data
segments.
Action: Relink the NLM. If the problem persists, contact a Novell support provider or
the vendor of the NLM.