User Guide

564 System Messages
System Messages
103-000150-001
August 29, 2001
Novell Confidential
Manual 99a38 July 17, 2001
SERVER-X-1666: Expected slot number missing or invalid.
Source: SERVER.EXE
Explanation: You did not specify a slot number when loading a driver.
Possible Cause: The card for which you are loading the drive requires a slot number.
Action: Reload the driver, specifying the slot number for the card.
SERVER-X-1682: I/O port number is NOT supported and was ignored.
Source: SERVER.EXE
Explanation: When loading a driver, you specified a port that was not supported and
therefore was not used. Instead, the system used a different port number that
appeared to be valid.
Possible Cause: The port you specified is probably invalid.
Action: If the driver loaded successfully, no further action is needed. If the driver
didn't load successfully, determine a correct port number and try reloading the
driver with the valid number.
SERVER-X-1683: Memory address is NOT supported and was ignored.
Source: SERVER.EXE
Explanation: A bad parameter was passed to a driver.
Action: Refer to the driver documentation to learn what parameters are required.
SERVER-X-1684: Memory length number is NOT supported and was ignored.
Source: SERVER.EXE
Explanation: A bad parameter was passed to a driver.
Action: Refer to the driver documentation to learn what parameters are required.
SERVER-X-1691: Memory range number to number is ALREADY in use.
Source: SERVER.EXE
Explanation: Another driver has already registered this memory address.
Action: Choose a different memory address or try loading the driver without
specifying a memory address, so NetWare can choose the address.