User Guide

566 System Messages
System Messages
103-000150-001
August 29, 2001
Novell Confidential
Manual 99a38 July 17, 2001
SERVER-X-1886: Unable to load SYSCALLS.NLM for memory protected execution.
Source: SERVER.EXE
Explanation: The SYSCALLS module could not be loaded. The console probably displays
a message providing more information.
Possible Cause: The module might be missing or there might be problems initializing the
module.
Action: Refer to the console messages for more information.
SERVER-X-1899: Unable to unload module name (error number).
Explanation: See “SERVER-X-1143: Unable to unload module name (error number).” on
page 550.
SERVER-X-1930: Rejected an incomplete NCP packet from Station number (NCP
number number).
Source: SERVER.EXE
Possible Cause: An NCP packet received from a client program had an invalid length, which
invalidated the packet. The client program might be an outdated version or it
might be corrupted.
Action: Replace the offending client program with updated or uncorrupted software.
SERVER-X-1934: Processed an incomplete NCP from Station number (NCP number
number).
Source: SERVER.EXE
Explanation: This informational message indicates that the NCP engine processed an NCP
packet even though the packet contained one or more fields with an invalid
length.
SERVER-X-1935: Rejected an NCP with a bad subfunction length, Station number
(NCP number number).
Source: SERVER.EXE
Explanation: An NCP packet received from a client program had an invalid sub-function
length, so the sub-function lengths did not add up to a valid IPX length.
Possible Cause: The client program might be an outdated version or it might be corrupted.
Action: Replace the offending client program with updated or uncorrupted software.