User Guide

SERVER Messages 569
System Messages
103-000150-001
August 29, 2001
Novell Confidential
Manual 99a38 July 17, 2001
SERVER-X-2206: FreeMovableCacheMemory found an invalid memory list.
Source: SERVER.EXE
Explanation: Memory might be corrupted.
Action: Replace memory or contact your support provider.
SERVER-X-2207: Insufficient memory to set up first load search path entry.
Source: SERVER.EXE
Explanation: See message “SERVER-X-872: Insufficient memory to set up first load search
path entry.” on page 545.
SERVER-X-2212: Unable to create address space with default name.
Source: SERVER.EXE
Explanation: The server could not create the address space.
Possible Cause: There may not be enough memory to create the space.
Action: Determine how much memory is available. If memory is low, unload
unnecessary modules or add more memory.
SERVER-X-2214: Unable to create address space name.
Source: SERVER.EXE
Explanation: The server could not create the address space.
Possible Cause: There might not be enough memory to create the space or the address space
name might be invalid.
Action: Check the address space name to see if it is too long or uses invalid characters.
If the name is valid, determine whether the server is low on memory. If
memory is low, unload unnecessary modules or add more memory.
SERVER-X-2213, 2241, 2301: Unable to load USERLIB.NLM for memory protected
execution.
Source: SERVER.EXE
Explanation: The USERLIB module could not be loaded. The console probably displays a
message providing more information.
Possible Cause: The module might be missing or there might be problems initializing the
module.
Action: Refer to the console messages for more information.