User Guide

574 System Messages
System Messages
103-000150-001
August 29, 2001
Novell Confidential
Manual 99a38 July 17, 2001
SERVER-X-2600: Unable to read load file header.
Source: SERVER.EXE
Explanation: The server tried to read the NLM header but received an error. The NLM was
not loaded.
Possible Cause: The NLM may be corrupted.
Action: Replace the NLM with an uncorrupted version, if possible. Contact the NLM
vendor.
SERVER-X-2601: Unable to read version information.
Source: SERVER.EXE
Explanation: The server tried to read the version of the NLM being loaded and could not.
The NLM was not loaded.
Possible Cause: The NLM may be corrupted.
Action: Replace the NLM with an uncorrupted version, if possible. Contact the NLM
vendor.
SERVER-X-2625: Memory length must be on a paragraph boundary (i.e. number or
number).
Source: SERVER.EXE
Explanation: The REGISTER MEMORY command could not be executed because it was
given an invalid memory length as a parameter.
Possible Cause: The hexadecimal memory values specified as parameters to the REGISTER
MEMORY command were invalid.
Action: See REGISTER MEMORY in Utilities Reference for instructions on
calculating the correct memory values for the command.
SERVER-X-2628: There is no memory present at the specified address..
Source: SERVER.EXE
Explanation: Invalid parameters were passed to the REGISTER MEMORY command.
Action: Re-execute the command with valid memory addresses. See REGISTER
MEMORY in Utilities Reference to learn how specify the hexadecimal
memory addresses required by the command.