User Guide

576 System Messages
System Messages
103-000150-001
August 29, 2001
Novell Confidential
Manual 99a38 July 17, 2001
SERVER-X-2973: Warning: extra input ignored (value).
Source: SERVER.EXE
Explanation: Extra input was included when the SET command was executed.
Action: Make sure the SET parameter was executed with the correct values. Re-
execute the SET command if necessary.
SERVER-X-2994: Unable to allocate memory for new language name.
Source: SERVER.EXE
Possible Cause: The operating system was unable to allocate memory for a new language name
because it is out of memory.
Action: Increase the memory available to the server. See Freeing Server Memory
Temporarily in the Server Operating System Administration Guide.
SERVER-X-2995: Unable to allocate memory for new language.
Source: SERVER.EXE
Possible Cause: The operating system was unable to allocate memory for a new language
because it is out of memory.
Action: Increase the memory available to the server. See Freeing Server Memory
Temporarily in the Server Operating System Administration Guide.
SERVER-X-3044: Unable to find load file filename.
Explanation: See message “SERVER-X-1948: Unable to find load file filename.” on page
567.
SERVER-X-3085: Invalid offset from Universal Time Coordinate.
Source: SERVER.EXE
Possible Cause: You did not enter an offset from the Universal Time Coordinate or you
specified an offset that is not valid (for example, it might be too big or too
small).
Action: Specify a valid offset from the Universal Time Coordinate.