User Guide

SMDR Messages 589
System Messages
103-000150-001
August 29, 2001
Novell Confidential
Manual 99a38 July 17, 2001
SMDR Messages
These messages are generated by the Storage Management Data Requester
(SMDR) Module.
SMDR-X-1: An internal error has occurred. An external SMDR requested a connection
that cannot be opened.
Source: SMDR.NLM
Possible Cause: An internal error has occurred in the program. The underlying transport was
unable to complete the connection transaction due to a network disruption or
failure in the protocol driver (for example, SPXS.NLM, etc.).
Action: Retry the operation. If the problem persists, contact a Novell support provider.
SMDR-X-2: An internal error has occurred. The SMDR was unable to provide a thread
to service the connection.
Source: SMDR.NLM
Explanation: Normally SMDR creates a thread for a new service process for each
connection. In this case, the server did not have enough memory for this
process.
Action: Increase the memory available to the server. See Freeing Server Memory
Temporarily in the Server Operating System Administration Guide.
SMDR-X-3: An internal error has occurred. The SMDR was unable to broadcast a SAP.
The SMDR will unload.
Source: SMDR.NLM
Explanation: An internal error has occurred in the program. The Service Advertising
Protocol (SAP) failed.
Action: Try bringing down the server, then rebooting it. Reload the SMDR. If the
problem persists, contact a Novell support provider.