User Guide

SMDR Messages 591
System Messages
103-000150-001
August 29, 2001
Novell Confidential
Manual 99a38 July 17, 2001
SMDR-X-8: An internal error has occurred. One or more of the parameters is null or
invalid.
Source: SMDR.NLM
Possible Cause: An internal error has occurred in the program. An SMS resource user
(SBACKUP, for example) passed corrupted data to an SMS routine. There
might be a bug in the program.
Action: Report the error to the vendor of the SMS compliant software.
SMDR-X-9: The server is unable to allocate sufficient memory.
Source: SMDR.NLM
Action: Increase the memory available to the server. See Freeing Server Memory
Temporarily in the Server Operating System Administration Guide.
SMDR-X-10: An internal error has occurred. The TLI transport underlying SMS has
failed.
Source: SMDR.NLM
Possible Cause: An internal error has occurred in the TLI transport for the SMDR. The
likelihood of this error occurring increases as the number of hops between
servers increases. The reason for the failure is internal to the supported
protocol (SPX, TCP/IP, or ADSP). Heavy traffic can also contribute to the
difficulty.
Action: Run the backup or restore on a server closer to the target, during off hours. If
the problem persists, contact a Novell support provider.
SMDR-X-11: An internal error has occurred. The requested function is not supported.
Source: SMDR.NLM
Possible Cause: An internal error has occurred. This error message indicates a software
malfunction.
Action: Report the error to the vendor of the SMS compliant software.
SMDR-X-12: The named module is already registered to SMDR.
Source: SMDR.NLM
Explanation: SMS resources (TSAs or SDIs, for example) can be loaded only once per
server. Subsequent attempts to load multiple copies will result in this error
message. This message is for information only.