User Guide

594 System Messages
System Messages
103-000150-001
August 29, 2001
Novell Confidential
Manual 99a38 July 17, 2001
Possible Cause: This error message indicates that the workstation is available only on a
protocol not supported by that SMDR, causing the redirection attempt to fail.
Action: Replace the SMDR with one that supports the needed protocols and retry the
operation. If the problem persists, contact a Novell support provider.
SMDR-X-21: The maximum number of connections allowed through the SMDR (64)
has been exceeded.
Source: SMDR.NLM
Possible Cause: The SMDR allows a maximum of 64 simultaneous connections.
Action: Eliminate unneeded connections; then try the operation again.
SMDR-X-22: An internal error has occurred. A handle is tagged invalid or the pointer
to the handle is null.
Source: SMDR.NLM
Possible Cause: An internal error has occurred in the program. An SMS resource user
(SBACKUP, for example) passed corrupted data to an SMS routine. There
might be a bug in the software program.
Action: Report the error to the vendor of the SMS compliant software.
SMDR-X-23: An internal error has occurred. The offset to the end of the field did not
reference the correct field ending.
Source: SMDR.NLM
Possible Cause: A data format error occurred in the System Independent Data Format (SIDF)
data.
Action: Retry the operation. If the error recurs, check the hardware read-write head,
then retry the operation. If the problem persists, the media might be faulty.
SMDR-X-24: An internal error has occurred. Either the list has no more entries or the
specified name space type does not exist.
Source: SMDR.NLM
Possible Cause: This error indicates that all of the name spaces in the data set have been
represented and processed to completion by SMS.
Action: Report the error to the vendor of the SMS compliant software.