User Guide

SMDR Messages 599
System Messages
103-000150-001
August 29, 2001
Novell Confidential
Manual 99a38 July 17, 2001
SMDR-X-68: Unassigned error has occurred.
Source: SMDR.NLM
Possible Cause: This error code is not used in the current version of the SMDR.
Action: Not applicable.
SMDR-X-69: An internal error has occurred. The command issued to the listener is
invalid.
Source: SMDR.NLM
Possible Cause: An unknown command has been sent to the SMDR listener.
Action: Check the commands that can be sent to the SMDR listeners. Retry the
operation. If the problem persists, contact a Novell support provider.
SMDR-X-70: An internal error has occurred. No protocols or services are registered.
Source: SMDR.NLM
Possible Cause: No protocols or services are registered with the SMDR.
Action: Configure the correct protocols and services. Retry the operation. If the
problem persists, contact a Novell support provider.
SMDR-X-71: An internal error has occurred. The maximum limit has been registered.
No more protocols or services can be registered.
Source: SMDR.NLM
Possible Cause: SMDR has a limit of 16 services and 8 protocols that can be registered. The
maximum has been reached.
Action: Retry registering the services or protocols after removing some of the entries.
If the problem persists, contact a Novell support provider.
SMDR-X-72: An internal error has occurred. Access to the locked data structure or
other objects failed.
Source: SMDR.NLM
Possible Cause: Access to some of the internal members is mutually exclusive. The data
structure is locked before it is updated. This error indicates that the operation
has failed.
Action: Retry the operation. If the problem persists, contact a Novell support provider.