User Guide

604 System Messages
System Messages
103-000150-001
August 29, 2001
Novell Confidential
Manual 99a38 July 17, 2001
SMDR-X-92: An internal error has occurred. Could not connect to the specified
endpoint.
Source: SMDR.NLM
Possible Cause: The specified remote SMDR could not be connected to. The problem could be
heavy network traffic, or an incorrect server configuration.
Action: Check the network connection and server configuration. Retry the operation.
If the problem persists, contact a Novell support provider.
SMDR-X-93: The connection to the remote host is lost. The remote host might have
disconnected.
Source: SMDR.NLM
Possible Cause: This message is for information only.
Action: Try again.
SMDR-X-94: An error occurred while disconnecting from the remote host.
Source: SMDR.NLM
Possible Cause: The remote host might have exited abruptly without clearing the connections.
The remote system might have abended causing the communication to be lost.
Action: Retry after checking the remote server and its configuration. In most cases,
restarting the system and the SMDRs solves the problem.
SMDR-X-95: An internal error has occurred. The underlying transport used by SMS
has failed.
Source: SMDR.NLM
Possible Cause: The TLI being used by the SMDR encountered a problem.
Action: Check the server configuration. Restart the SMDR and retry the operation. If
the problem persists, contact a Novell support provider.
SMDR-X-96: An internal error has occurred. Could not spawn thread.
Source: SMDR.NLM
Possible Cause: The server might be heavily overloaded and could not allow any new threads
to be spawned by the SMDR.
Action: Reduce the server load by unloading unwanted modules. Retry the operation.
If the problem persists, contact a Novell support provider.