User Guide

SMSDI Messages 619
System Messages
103-000150-001
August 29, 2001
Novell Confidential
Manual 99a38 July 17, 2001
SMSDI-X-300: The transfer buffer passed was not large enough to hold the entire
transfer buffer from the media. SMSDI returned as much of the transfer buffer as
would fit.
Source: SMSDI.NLM
Possible Cause: An internal error has occurred in the program.
Action: Try again. If the problem persists, contact a Novell support provider.
SMSDI-X-301: One or more of the requested transfer requests was not able to be
canceled. SMSDI will complete those requests normally.
Source: SMSDI.NLM
Explanation: Even though an error occurred, SMSDI was able to complete one or more
requests. This message is for information only
SMSDI-X-302: A function was called which is not supported by this version of SMSDI.
Source: SMSDI.NLM
Possible Cause: A required device driver function is not supported by the current version of
SMSDI.
Action: Make sure the device driver is a current version and supports SMS. Also,
make sure that the server is running the most recent version of SMSDI.
Upgrade the device driver, device, or SMSDI if necessary. Try again. If the
problem persists, contact a Novell support provider.
SMSDI-X-303: An SMSDI function was asked to perform a service that is not
supported in this version of SMSDI.
Source: SMSDI.NLM
Possible Cause: An internal error has occurred in the program.
Action: Try again. If the problem persists, contact a Novell support provider.
SMSDI-X-304: The NetWare operating system returned an error.
Source: SMSDI.NLM
Possible Cause: An error occurred in the NetWare operating system.
Action: Try again. If the problem persists, contact a Novell support provider.