User Guide

SMSDI Messages 621
System Messages
103-000150-001
August 29, 2001
Novell Confidential
Manual 99a38 July 17, 2001
SMSDI-X-310: The medium is write protected.
Source: SMSDI.NLM
Possible Cause: The write protect switch on the medium is set.
Action: Use another medium or remove the write-protection from the currently
selected medium.
SMSDI-X-311: The device driver or device itself returned an unknown error.
Source: SMSDI.NLM
Possible Cause: An unknown error occurred in the device driver or the device itself.
Action: Make sure the device is functioning properly. Also make sure the server is
running a current, uncorrupted copy of the driver. Then try again. If the
problem persists, contact a Novell support provider.
SMSDI-X-312: The header is too large to fit in a physical sector.
Source: SMSDI.NLM
Possible Cause: The medium is not compatible with SMSDI.
Action: Make sure the medium is compatible with SMS. Try again. If the problem
persists, contact a Novell support provider.
SMSDI-X-313: The medium is not formatted.
Source: SMSDI.NLM
Possible Cause: This type of medium needs to be formatted before using it.
Action: Format the medium.
SMSDI-X-314: The medium is blank.
Source: SMSDI.NLM
Explanation: This message is associated with a prompt from Enhanced SBACKUP telling
the user to label the medium. This message is for information only.
SMSDI-X-315: The beginning of media was detected.
Source: SMSDI.NLM
Possible Cause: An internal program error has occurred.
Action: Try again. If the problem persists, contact a Novell support provider.