User Guide

SPXS Messages 627
System Messages
103-000150-001
August 29, 2001
Novell Confidential
Manual 99a38 July 17, 2001
SPXS Messages
The following includes messages from SPXS.NLM.
SPX-X-5: There is insufficient memory for allocation.
Source: SPXS.NLM
Explanation: SPXII was unable to allocate the requested amount of memory for the Protocol
ID table or the board registration table.
Possible Cause: The server does not have enough available memory.
Action: Increase the memory available to the server. See Freeing Server Memory
Temporarily in the Server Operating System Administration Guide.
SPX-X-6: There insufficient memory for allocation.
Source: SPXS.NLM
Explanation: SPXII was unable to allocate the requested amount of memory for the Protocol
ID table or the board registration table.
Possible Cause: The server does not have enough available memory.
Action: Increase the memory available to the server. See Freeing Server Memory
Temporarily in the Server Operating System Administration Guide.
SPX-X-7: SPXII cannot be configured.
Source: SPXS.NLM
Explanation: An attempt was made to configure SPXII, but SPXII parameters cannot be
configured.