User Guide

642 System Messages
System Messages
103-000150-001
August 29, 2001
Novell Confidential
Manual 99a38 July 17, 2001
Possible Cause: A hardware failure occurred.
Action: Find out if other users and workstations are experiencing the same problem. If
so, contact a Novell support provider. If the problem persists and is isolated to
this workstation, check the hardware and cabling.
33: The first element of the list could not be obtained because the list is empty.
Source: utility name in message prefix
Possible Cause: The program expected an active list and there was none. This is a program
logic error.
Action: Contact a Novell support provider.
35: The current list cannot be restored with list buffer number number because the
buffer number is invalid.
Source: utility name in message prefix
Possible Cause: An internal system error probably has occurred.
Action: Restart the workstation. If the problem persists, contact a Novell support
provider.
36: The current list cannot be saved because the list save buffer number number is
invalid.
Source: utility name in message prefix
Possible Cause: An internal system error probably has occurred.
Action: Restart the workstation. If the problem persists, contact a Novell support
provider.
37: A section of memory that was previously allocated could not be freed.
Source: utility name in message prefix
Possible Cause: An internal system error probably has occurred.
Action: Restart the workstation. If the problem persists, contact a Novell support
provider.