User Guide

TEXTUTIL-utility_name 643
System Messages
103-000150-001
August 29, 2001
Novell Confidential
Manual 99a38 July 17, 2001
38: The bindery is locked. Normally the bindery is only locked if the supervisor is
backing up volume SYS:. No information can be obtained until the supervisor unlocks
the bindery.
Source: utility name in message prefix
Explanation: This is a temporary inconvenience.
Action: Wait a few minutes and try again.
39: Server name does not respond.
Source: utility name in message prefix
Possible Cause: The user is not attached to the server.
Action: Make sure the user is attached to the server, and try again.
Possible Cause: The server is down or malfunctioning.
Action: Make sure the server is running and functioning properly.
40: Server name is not connected.
Source: utility name in message prefix
Possible Cause: The most likely cause is that the workstation is not attached to this server. This
could be a cabling problem.
Action: Check the cabling, or make sure the workstation is attached to the server, and
try again.
41: Your station is already attached to the maximum number of servers allowed. You
must detach from at least one server before you can attach to server name.
Source: utility name in message prefix
Possible Cause: The user has tried to attach to more servers than the user is allowed to.
Action: Detach from at least one server before attempting to attach to the new server.
42: Server name does not have any free connection slots. Another user must detach
from it before you can attach to it.
Source: utility name in message prefix
Explanation: The server indicated in the message does not have any free connection slots.
Action: Make sure another user detaches from the server before this user attempts to
attach to it.