User Guide

TEXTUTIL-utility_name 645
System Messages
103-000150-001
August 29, 2001
Novell Confidential
Manual 99a38 July 17, 2001
76: The system could not change the file attributes of file name. The mode was
number.
Source: utility name in message prefix
Possible Cause: An internal system error probably has occurred.
Action: Restart the workstation. If the problem persists, contact a Novell support
provider.
79: The procedure EditText failed because the default text was longer than the
maximum length allowed.
Source: utility name in message prefix
Possible Cause: This is probably an internal program logic error, though it could be caused by
message expansion during translation.
Action: Contact a Novell support provider.
82: The paste buffer is empty.
Source: utility name in message prefix
Explanation: This is a status message indicating that user tried to retrieve a data block from
the paste buffer, but nothing was in the buffer.
83: The text buffer is full.
Source: utility name in message prefix
Possible Cause: The text block the user marked is too large to hold in the text buffer.
Action: Mark and process several smaller text blocks instead of trying to process a
single large block.
85: The marked block is too big for the available memory.
Source: utility name in message prefix
Possible Cause: The text block the user marked is too large to hold in the workstation's
memory.
Action: Mark and process several smaller text blocks instead of trying to process a
single large block.