User Guide

TEXTUTIL-utility_name 647
System Messages
103-000150-001
August 29, 2001
Novell Confidential
Manual 99a38 July 17, 2001
95: The text is too long to fit in the current portal.
Source: utility name in message prefix
Possible Cause: This is probably an internal program logic error, though it could be caused by
message expansion from translation.
Action: Contact a Novell support provider.
96: No portal is currently selected to display the text.
Source: utility name in message prefix
Possible Cause: The program expected an active portal when there was none. This is a program
logic error.
Action: Contact a Novell support provider.
108: No server is attached.
Source: utility name in message prefix
Possible Cause: The user tried to execute a command on a server other than the default server,
but was not attached to that server. The user must be attached to a server before
he or she can use it.
Action: Do one or both of the following:
 Use the WHOAMI utility to list the servers to which the user is logged in
or attached; then specify one of these servers when the user executes the
utility. To see server attachments, use the /B option (syntax: SERVER /B).
 Use the LOGIN utility to attach to the desired server; then map a drive to
the server and use the new drive mapping in the command. Be sure to use
the /NS option to attach; otherwise, the user will lose the default option.
109: A read error occurred during attempt to read the overlay file name_RUN.OVL.
Source: utility name in message prefix
Possible Cause: The user is using an outdated or corrupted version of the overlay file, the
search drive is incorrect, or the workstation has a connection problem.
Action: If the file is in the proper search path and is a current version, try replacing it
with a backup. Make sure the workstation is connected to the network. Try
again. If the problem persists, contact a Novell support provider.