User Guide

666 System Messages
System Messages
103-000150-001
August 29, 2001
Novell Confidential
Manual 99a38 July 17, 2001
563: The system was not able to retrieve a count of volume objects in the current
context.
Source: utility name in message prefix
Possible Cause: An internal error prevented the program from getting the volume information.
Action: Restart the utility and try again. If the problem persists, contact a Novell
support provider.
564: The system was not able to read the name of a volume object in the current
context.
Source: utility name in message prefix
Possible Cause: The database is corrupt, the search drive is incorrect, or the workstation has a
connection problem.
Action: If the database is in the proper search path and is a current version, try
replacing it with a backup. Make sure the workstation is connected to the
network. Try again. If the problem persists, contact a Novell support provider.
565: The current context has not been set properly.
Source: utility name in message prefix
Possible Cause: The Novell eDirectory object name incorrect.
Action: Make sure the object name is typed correctly. (Use ConsoleOne to verify the
correct name.)
Possible Cause: The workstation does not have enough memory to set up the context.
Action: Increase the memory available to the workstation. See “Resolving
Workstation Memory Problems” on page 787.
566: The system was not able to set the current context.
Source: utility name in message prefix
Possible Cause: The eDirectory object name incorrect.
Action: Make sure the object name is typed correctly. (Use ConsoleOne to verify the
correct name.)
Possible Cause: The workstation does not have enough memory to set up the context.
Action: Increase the memory available to the workstation. See “Resolving
Workstation Memory Problems” on page 787.