User Guide

TLI Messages 693
System Messages
103-000150-001
August 29, 2001
Novell Confidential
Manual 99a38 July 17, 2001
9: Incorrect sequence number.
Source: TLI library
Possible Cause: The sequence number specified did not match the sequence number expected
when the connection was being established or rejected.
Action: Contact the developer or vendor of the application.
10: Buffer size insufficient.
Source: TLI library
Possible Cause: A function has been called with a buffer of insufficient size to return protocol
information.
Action: If you have access to developer documentation, look up platform-specific
protocol requirements of the system to determine a valid buffer size.
Otherwise, contact the developer or vendor of the application.
11: Cannot send message.
Source: TLI library
Possible Cause: An unidentified error has prevented the message from being sent.
Action: Contact the developer or vendor of the application.
12: An asynchronous event has occurred.
Source: TLI library
Possible Cause: In the process of calling a function, an asynchronous event has occurred on the
endpoint. The t_look function can be called to determine what event took
place.
Action: Contact the developer or vendor of the application.
13: Transport provider could not allocate an address.
Source: TLI library
Possible Cause: The specified protocol address was in an incorrect format, contained illegal
information, or was already being used. No dynamic addresses remain.
Action: If you have access to developer documentation, look up platform-specific
protocol restrictions on address format. Otherwise, contact the developer or
vendor of the application.