User Guide

TLI Messages 695
System Messages
103-000150-001
August 29, 2001
Novell Confidential
Manual 99a38 July 17, 2001
20: No unitdata error indication is available.
Source: TLI library
Possible Cause: An error function was used by the application when no error condition existed.
Action: Contact the developer or vendor of the application.
21: No disconnect indication is available.
Source: TLI library
Possible Cause: No disconnect indication currently exists on the specified transport endpoint.
Action: Contact the developer or vendor of the application.
22: Unsupported struct-type requested.
Source: TLI library
Possible Cause: The structure specified in the t_alloc function is not supported.
Action: Contact the developer or vendor of the application.
23: Invalid transport provider name.
Source: TLI library
Possible Cause: The transport protocol specified when the t_open function is not available.
Action: Make sure you have loaded all of the protocols required by the application. If
the problem persists, contact the developer or vendor of the application.
24: Qlen is zero.
Source: TLI library
Possible Cause: The argument qlen of the endpoint referenced by fd is zero. The application is
trying to function as a server after initializing itself as a client.
Action: Contact the developer or vendor of the application.
25: Address in use.
Source: TLI library
Possible Cause: The transport provider could not allocate the specified address because it is
currently being used.
Action: Specify an address that is not in use.