User Guide

750 System Messages
System Messages
103-000150-001
August 29, 2001
Novell Confidential
Manual 99a38 July 17, 2001
VREPAIR-X-208: Error writing to error log file name. Message: message not written to
file. Error log file closed.
Source: VREPAIR.NLM
Possible Cause: The log file's disk media has failed (for example, removing the floppy
diskette) or run out of space.
Action: If you want a log file, then stop VREPAIR using the F1 option, fix the media
problem, and then run VREPAIR again. VREPAIR will continue to repair the
volume if you do nothing.
VREPAIR-X-209: Error writing to error log file name. Error log file closed.
Source: VREPAIR.NLM
Possible Cause: The log file's disk media has failed (for example, removing the floppy
diskette) or run out of space.
Action: If you want a log file, then stop VREPAIR using the F1 option, fix the media
problem, and then run VREPAIR again. VREPAIR will continue to repair the
volume if you do nothing.
VREPAIR-X-279: Unable to allocate memory to read mirror FAT block sequence
number.
Source: VREPAIR.NLM
Possible Cause: The server does not have enough memory available.
Action: Increase the memory available to the server. See Freeing Server Memory
Temporarily in the Server Operating System Administration Guide.
VREPAIR-X-301: Unable to allocate memory to record needed FAT entry correction.
Try using the Save Changes Immediately option.
Source: VREPAIR.NLM
Possible Cause: The server does not have enough memory available.
Action: Increase the memory available to the server. See Freeing Server Memory
Temporarily in the Server Operating System Administration Guide.
VREPAIR-X-302: Unable to allocate memory to record needed FAT entry correction.
Source: VREPAIR.NLM
Possible Cause: The server does not have enough memory available.
Action: Increase the memory available to the server. See Freeing Server Memory
Temporarily in the Server Operating System Administration Guide.