User Guide

Shared Messages for LAN Drivers 761
System Messages
103-000150-001
August 29, 2001
Novell Confidential
Manual 99a38 July 17, 2001
016: The node address was incorrectly specified in the NET.CFG file.
Source: TRXNET-DOS.LAN
Explanation: The node address override in the NET.CFG file is too long.
Action: Edit the NET.CFG file and correct the node address. The node address must
be less than or equal to 12 hex digits.
017: An invalid keyword was specified in NET.CFG on line number.
Source: TRXNET-DOS.LAN
Explanation: The key word on the line indicated was not recognized.
Action: Edit the NET.CFG file and correct the spelling of the keyword.
018: The frame type specified in the NET.CFG is not supported.
Source: TRXNET-DOS.LAN
Explanation: The frame type specified with the FRAME keyword is not supported by the
driver.
Action: Edit the NET.CFG file and fix frame type.
019: An invalid TRXNET node address is specified in NET.CFG. The MLID modified the
incorrect address bits.
Source: TRXNET-DOS.LAN
Explanation: The node address specified in the NET.CFG file has set reserved bits.
Action: Edit the NET.CFG file and correct the node address.
025: You cannot load MSM31X on a NetWare 3.10 server.
Source: NE1000-NW.LAN, NE2-NW.LAN, NE2000-NW.LAN, NE3200-NW.LAN
Explanation: The computer attempted to load MSM31X.NLM on a NetWare 3.10 server.
MSM31X.NLM will run only on a NetWare 3.11 server.
Action: Load a version of the Media Support Module (MSM) that will run on a
NetWare 3.10 server, or upgrade the server to NetWare 3.11 or later server.