User Guide

Shared Messages for LAN Drivers 765
System Messages
103-000150-001
August 29, 2001
Novell Confidential
Manual 99a38 July 17, 2001
073: Unable to allocate memory.
Source: NE1000-NW.LAN, NE2-NW.LAN, NE2000-NW.LAN, NE3200-NW.LAN
Possible Cause: The server does not have enough available memory. NetWare cannot allocate
memory for the LAN driver.
Action: Increase the memory available to the server. See Freeing Server Memory
Temporarily in the Server Operating System Administration Guide.
074: The hardware interrupt cannot be set.
Source: NE1000-NW.LAN, NE2-NW.LAN, NE2000-NW.LAN, NE3200-NW.LAN
Possible Cause: NetWare could not set the hardware interrupt that the LAN driver registered.
The LAN driver must have changed information in the configuration table
(IntNumber, SharingFlags) after the hardware options were registered.
Action: Make sure the interrupt setting on the board matches the setting in the
AUTOEXEC.NCF file.
075: The MLID cannot be registered with the LSL.
Source: NE1000-NW.LAN, NE2-NW.LAN, NE2000-NW.LAN, NE3200-NW.LAN
Possible Cause: The LAN driver's Link Support Layer (LSL) ran out of logical boards,
Action: Unload nonessential LAN drivers that are consuming large numbers of logical
boards.
Possible Cause: The LAN driver's Link Support Layer could not allocate memory for its
internal structures.
Action: Increase the memory available to the server. See Freeing Server Memory
Temporarily in the Server Operating System Administration Guide.
076: The polling procedure cannot be added.
Source: NE1000-NW.LAN, NE2-NW.LAN, NE2000-NW.LAN, NE3200-NW.LAN
Possible Cause: Too many polling processes are registered with the operating system.
Action: Unload nonessential NLM programs that are using a polling procedure.