User Guide

Shared Messages for LAN Drivers 769
System Messages
103-000150-001
August 29, 2001
Novell Confidential
Manual 99a38 July 17, 2001
237: The adapter is beaconing.
Source: CNTR2000.LAN
Explanation: The ring has detected a network board that is trying to access the network with
an incorrect data rate.
Action: Find out which network board in the ring is set at an incorrect data rate, and
correct it.
239: The cable is disconnected at the board.
Source: CNTR2000.LAN
Explanation: The cable is disconnected from the network board.
Action: Securely fasten the cable to the network board.
240: Cable is disconnected at the MAU.
Source: CNTR2000.LAN
Explanation: The cable is disconnected from the Multistation Access Unit (MAU).
Action: Securely fasten the cable into the MAU.
241: The Auto Removal process reset the adapter.
Source: CNTR2000.LAN
Explanation: The network board removed itself from the ring due to internal errors. The
driver will reset the network board and continue.
Action: No action is required. If this condition occurs frequently, install another board
to see if it continues.
241: The board's ROM has checksum errors.
Source: NE3200-NW, CNTR2000.LAN
Possible Cause: The network board failed the self-test. A ROM checksum error occurred.
Action: Check the network board and other hardware. If necessary, replace the
network board.