User Guide

Common Workstation Utilities Error Messages 775
System Messages
103-000150-001
August 29, 2001
Novell Confidential
Manual 99a38 July 17, 2001
Common Workstation Utilities Error Messages
The following error messages are common to most workstation utilities:
901: You are not attached to the specified server.
Source: FLAG.EXE, PURGE.EXE, RIGHTS.EXE
Possible Cause: The user tried to execute a command on a server other than the default server
to which the user was not attached.
Action: Specify a path to the utility on the appropriate server.
Action: Attach to the desired server, and then map a drive to the server and use the new
drive mapping in the command. Use the /NS option to attach; otherwise, you
will lose the default option.
903: The command line syntax is invalid.
Source: CX.EXE, FLAG.EXE, LOGOUT.EXE, MAP.EXE, PURGE.EXE,
RIGHTS.EXE, SETPASS.EXE
Explanation: The format of the command was incorrect.
Action: Make sure the syntax, path, and optional parameters are correct. Use the
online help screens to view the correct command line syntax.
905: This utility was unable to initialize the country information.
Source: FLAG.EXE, LOGIN.EXE, LOGOUT.EXE, MAP.EXE, RIGHTS.EXE,
SETPASS.EXE
Explanation: This utility was unable to get the country information from the workstation.
Possible Cause: The workstation's operating system configuration is not correct.
Action: Make sure that the workstation's operating system configuration is correct.