User Guide

Common Workstation Utilities Error Messages 779
System Messages
103-000150-001
August 29, 2001
Novell Confidential
Manual 99a38 July 17, 2001
918: This utility was unable to get connection information. Error code: code.
Source: LOGIN.EXE, LOGOUT.EXE
Explanation: For some unexpected reason, this utility was unable to obtain information
about a particular server.
Action: Issue the command again from a different drive. For information about a
specific error code, search the Error Codes online documentation (http://
www.novell.com/documentation/lg/nwec/docui/index.htm).
919: This utility could not create a connection list. Error code.
Source: LOGIN.EXE, LOGOUT.EXE, MAP.EXE, SETPASS.EXE
Explanation: The utility failed in its attempt to create a list of all the connections to which
the workstation is currently attached.
Possible Cause: The error code identifies a specific reason for the failure.
Action: For information about a specific error code, search the Error Codes online
documentation (http://www.novell.com/documentation/lg/nwec/docui/
index.htm).
920: This utility was unable to allocate number bytes of memory.
Source: CX.EXE, LOGIN.EXE, LOGOUT.EXE, MAP.EXE, SETPASS.EXE
Possible Cause: During its processing, the utility attempted to allocate more memory. No
additional memory was available, so the program was unable to allocate the
specified number of bytes.
Action: Increase the memory available to the workstation. See “Resolving
Workstation Memory Problems” on page 787.
921: Either the supervisor has locked the bindery or volume SYS: is not mounted.
Source: CAPTURE.EXE, LOGIN.EXE, MAP.EXE, SETPASS.EXE
Possible Cause: The volume SYS: is not mounted.
Action: Make sure that volume SYS: is mounted. (Type VOLUMES at the server
console to determine whether the volume SYS: has been mounted.)
Possible Cause: The supervisor has locked the bindery.
Action: If volume SYS: is mounted, make sure that the bindery is not closed.