User Guide

780 System Messages
System Messages
103-000150-001
August 29, 2001
Novell Confidential
Manual 99a38 July 17, 2001
922: Intruder detection lockout has disabled this account.
Source: CAPTURE.EXE, LOGIN.EXE, MAP.EXE, SETPASS.EXE
Explanation: A user has tried to log in to the account without supplying the correct
password within the allowed number of login attempts. The user cannot use
the account until it is reopened by the network supervisor.
Possible Cause: The network supervisor can limit any account on the server to a specific
number of login attempts to protect the account from intrusion by
unauthorized persons.
Action: Contact the network supervisor to enable the account, or wait a specified
period of time for the account to become enabled again (default: 15 minutes).
923: An unexpected error has occurred. Error code: code.
Source: CAPTURE.EXE, LOGIN.EXE, MAP.EXE, SETPASS.EXE
Explanation: An unexpected error occurred.
Action: Try the operation again. If the error persists, contact a Novell support provider.
For information on the specific error code, search the Error Codes online
documentation (http://www.novell.com/documentation/lg/nwec/docui/
index.htm).
924: All drives are in use.
Source: LOGIN.EXE, MAP.EXE
Possible Cause: Every drive from Z: down to the local drives is in use. This utility cannot map
any more drives.
Action: Delete a mapping to a drive not being currently used.
925: The server specified is a Personal NetWare server. You cannot attach to a
Personal NetWare server with this utility. Use the Personal NetWare utilities to access
this connection.
Source: CAPTURE.EXE, LOGIN.EXE, MAP.EXE, PURGE.EXE, SETPASS.EXE
Explanation: This utility is not compatible with a Personal NetWare server.
Action: Use the corresponding Personal NetWare utility.