User Guide

22 NetWare Migration Wizard 6 Aministration Guide
NetWare Migration Wizard 6 Aministration Guide
103-000161-001
August 29, 2001
Novell Confidential
Manual Rev 99a38 July 17, 2001
To migrate data from NetWare 4, NetWare 5, or NetWare 6, complete the
following tasks in the order they are listed.
1. “Meet System and Software Requirements” on page 22
2. “Run Migration Wizard” on page 25
3. “Perform Post-Migration Tasks” on page 32
Meet System and Software Requirements
Preparing the Workstation
Make sure your workstation has the following:
 A Windows 98 or Windows NT 4/2000 workstation with 50 MB of
available disk space.
 The Windows 98 workstation must be running Novell Client
TM
for
Windows 98 version 3.3 or later.
IMPORTANT: NetWare Migration Wizard 6 does not run on Windows 95
workstations.
 The Windows NT 4/2000 workstation must be running Novell Client
for Windows NT version 4.8 or later.
 If migrating from NetWare 4, the IPX
TM
protocol should be configured on
your Novell Client workstation.
 For better performance, it is strongly recommended that the source server,
destination server, and client workstation be running on a common LAN
segment.
Preparing the Source Server
The source server is the NetWare server that contains the files, volumes, and
NDS objects that will be copied to the NetWare destination server. Valid
source servers can be running NetWare 4.11, 4.2, 5.0, 5.1, or 6.
 Use ConsoleOne
TM
to verify that you have the Supervisor right to the
source server’s file system and the source server itself.
 Update the source server with the latest NetWare Support Pack.
Updates are available at the Consolidated Support Pack Home Page
(http://support.novell.com/csp/csplist.html).