User Guide
Troubleshooting 57
NetWare Migration Wizard 6 Aministration Guide
103-000161-001
August 29, 2001
Novell Confidential
Manual Rev 99a38 July 17, 2001
4
To perform the NDS migration again, launch Migration Wizard and open
the project you were previously working on. When the project opens and
you see the Project Window, click the Begin NDS Migration button and
follow the instructions in “Begin NDS Migration” on page 29.
Remove NDS from the Destination Server
If Begin NDS Migration, button 3, successfully completed and the destination
server has already rebooted and taken on the name and identity of the source
server, you must remove NDS from the destination server before you can
restore NDS to the source server.
1 At the destination server console, enter NWCONFIG.
2 Select Directory Options > Remove Directory Services from This Server.
3 Press Enter when you see a warning instructing you to not remove
Directory Services.
Ignore any other errors during the removal of NDS.
4 Select Yes to Remove Directory Services.
5 Enter the Admin username and password.
6 Press Enter to reference a different object.
This object is used when NDS is restored back to the source server.
WARNING: Do not press Esc. If you do, the server references you entered will not
be saved or restored to the server.
7 Enter the full Admin username as the placeholder object distinguished
name.
8 Enter [Root] as the distinguished name to change from.
9 If the information about single reference time source appears, review the
information and press Enter.
10 If your server holds the Master copy of a replica, you will see a warning.
Press Enter.
11 Designate another server to hold the Master replica. You can choose to let
NWCONFIG randomly select another server, or you can designate one
yourself.
12 Return to the NWCONFIG utility and verify that NDS has been removed
by selecting Remove Directory Services from This Server.