User Guide

Setting Client Properties 43

Novell Client for Windows

103-000159-001

December 7, 2001

Novell Confidential

Manual 99a38 July 17, 2001

Using DHCP

If a DHCP server is set up on your network, the DHCP server can inform

Novell Client of network-specific configuration information.

You can easily configure Novell DHCP servers (NetWare 5 and later) to

distribute this information to the clients. See the server configuration

documentation for your NetWare product.

Clients obtain configuration information from DHCP even when you

statically configure the client’s IP address or even when the DHCP server used

to supply the information is different from the DHCP server supplying an IP

address to the client.

Using DHCP Like an NDS Server Name Service Provider

You can set up a DHCP server to inform Novell Client workstations that use

the IP protocol about an NDS

tree name and the IP addresses of servers that

are on that tree. When using this feature, it is best to specify the IP addresses

of the closest NDS servers containing partitions with the user information.

Using DHCP to Distribute SLP Configuration Information

You can configure the following SLP parameters through DHCP:

 IP Address of SLP Directory Agents

 SLP Scopes

Using DHCP to Distribute IPX Compatibility Information

You can configure the following IPX

Compatibility parameters through

DHCP:

 IP Address of Migration Agents

 CMD Network Number

 Migration Agent List Stale Time