User Guide

Installing Novell iFolder on NetWare 6 21
Novell iFolder Administration Guide
103-000132-001
November 21, 2001
Novell Confidential
Manual 99a38 July 17, 2001
6
(Optional) Continue with the NetWare 6 installation until you get to the
Summary screen at the end of the NetWare 6 installation.
The Summary screen lists all the products that you have selected to install
with NetWare 6.
7 At the Summary screen, click NetWare 6 > iFolder > Configure > Primary
LDAP Settings.
8 Enter the following LDAP information for your primary LDAP server:
 LDAP Host
Enter the IP address of your LDAP server in the LDAP Host field.
IMPORTANT: If you change your IP address here and your LDAP server is
configured with SSL encryption, there will be some post-installation
configuration required after the NetWare 6 installation. For more information,
see “LDAP over SSL” on page 24.
 LDAP Port
Enter the LDAP port you want to use.
If you are using port 389, the LDAP Group object must be marked to
Allow Clear Text Passwords. For more information, see “Port 389
and Clear Text Passwords” on page 24.
HINT: Choose port 389 if you want to use LDAP without SSL encryption or if
your LDAP server does not support SSL. Port 389 is also a good choice if
iFolder and LDAP are running on the same server (no communication or data
is being transferred across the wire, so no encryption is necessary).
Choose port 636 if you want to use SSL, which provides your network with
encryption and security when data is transferred across the wire. If you
choose port 636, there will be some post-configuration required after the
NetWare 6 installation. For more information, see “LDAP over SSL” on page
24.
 LDAP Login DN Context
This is the context of the container where your User objects are
located. iFolder allows you to enter multiple contexts. After each
context, insert a semicolon. Do not put any spaces between the
contexts.
 Subcontainer Search
If you want iFolder to search all subcontainers below the specified
LDAP login DN context, check this option.
IMPORTANT: If you selected to do subcontainer searches, there will be
some post-installation configuration required after the NetWare 6 installation.
For more information, see “Subcontainer Searches” on page 22.