User Guide

Installing Novell iFolder on Windows NT 4.0 or Windows 2000 27
Novell iFolder Administration Guide
103-000132-001
November 21, 2001
Novell Confidential
Manual 99a38 July 17, 2001
2
Locate the iFolder software that you downloaded and double-click the
iFolder IIS server executable (IISiFolderServer.EXE).
3 Read the Welcome screen and click Next.
4 Click Yes to accept the licensing agreement.
5 Enter your username and the name of your company, and then click Next.
6 Browse to the location where you want iFolder to install the setup files
and then click Next.
7 Enter the IP address of your LDAP server in the LDAP host field.
8 Enter the LDAP port you want to use.
If you are using port 389, the LDAP Group object must be marked to
Allow Clear Text Passwords. To verify this, launch ConsoleOne
TM
and
locate the context where your server resides, right-click the LDAP Group
object, click Properties, and check Allow Clear Text Passwords.
HINT: Choose port 389 if you want to use LDAP without SSL encryption. Port 389
is also a good choice if LDAP and iFolder are running on the same server or if your
LDAP server does not support Secure Socket Layer (SSL).
Choose port 636 if you want to use SSL, which provides your network with
encryption and security when data is transferred across the wire. If you choose port
636, you must create and install an SSL certificate for your iFolder server prior to
the iFolder installation. For more information, see “Server Requirements” on page
25.
9 If you have chosen port 636, enter the path to the LDAP Root Certificate.
This is the path to the place where you copied the SSL certificate prior to
the installation. For more information, see “Server Requirements” on
page 25.
10 Enter the LDAP login DN context.
11 Enter the context of the container where your User objects are located.
iFolder lets you enter multiple contexts. After each name, insert a
semicolon. Do not put any spaces between the names.
12 (Optional) If you want iFolder to search all subcontainers below the
LDAP login DN context, make sure you check the Subcontainer Search
check box.
13 (Conditional) If you are doing a subcontainer search, you must assign the
CN property to the Public object or create an LDAP proxy user.